德國SICK施克安全繼電器,C4MT-03634EAA03DE0
功能如果安裝安全裝置的半導體輸出（例如C4000，S3000）通
電，安全輸出觸點將閉合。當安全裝置中少個半導體輸
出斷電時，那么輸出觸點將返回到開路狀態。如果需要重啟
互鎖裝置，可以在安全裝置里面實現，例如C4000或者S300
0。依據EN 954-1的類別3或者類別4需要對接觸器進行監測。
這在連接的保護裝置中有提供，例如C4000或者S3000。
UE10-3OS單元中的常閉觸點(Y1-Y2)就是該接觸
The pivoting mounting bracket is made
 of black anodised aluminium. It will be covered by
the device after mounting. The pivoting
mounting bracket provides adjustment for
correcting the horizontal alignment of
 sender and receiver by ±2.0° after mounting.
Tighten the bolts on the pivoting mou
nting bracket to a torque of between 5 and 6 Nm.
Higher torques can damage the bracket;
lower torques provide inadequate protection
德國SICK施克安全繼電器,C4MT-03634EAA03DE0
器監測系統的部分。外部設備監測功能(EDM)
C2000(EDM/RES)型安全光幕連接到UE10-3OS安全繼電器上
•4（IEC61496) PL e（ISO13849）
•堅固的外殼，且在外殼上有三條安裝槽
•寬廣的檢測距離，zui遠達到70米
•具備EDM、RES、ADO功能以及SDL總線
•可選的附加特性：集成激光對準器，LED指示燈
•通過PC和CDS軟件進行系統設置
•配合UE403可直接連接Muting傳感器，實現Muting功能
When mounting the rigid mountin
to adjust and lock the multiple light beam safety
When mounting the bracket, note the
 distance and the position of the sliding nuts as
described in chapter 13.3 “Dimensional drawings” on page 119f.
The mounting screw is not included in the delivery.